GE Fanuc | Series Six | In Stock Ships Today GE Fanuc Series Six IC600

IC600CB502 Image


  • Availability: In Stock Ships Today!
  • Units in Stock: Immediate Availablity: 8 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE Fanuc
  • Description: Advanced Logic Control Module
  • Weight: 3 lbs :: ≈ 2 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC600CB502 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

October 1988 Logic Control Module GENERAL DESCRIPTION The Logic Control module is available in three versions: Advanced, Expanded and Expanded II. The module contains the system clock, a microprogram sequencer, and Programmable Read-Only Memory (PROM). The module provides control and timing signals to the CPU backplane for use by other modules, and microprogram instructions to the Arithmetic Control module through a ribbon cable. The Logic Control module features and benefits are summarized in Table 1. Refer to Table 3 for Logic Control module specifications. NOTE Operation of the system without the ribbon cable connected between the Arithmetic control Module results in unpredictable execution by the CPU. NOTE Use of the Expanded II Logic Control Module requires use of Logicmaster 6, Release 4 or later to ensure proper operation. Table 1. FEATURES AND BENEFITS FEATURES Compatible with most Series Six and Series Six Plus CPUS. BENEFITS Reduced spare parts inventory cost. Three Versions Available: Advanced Functions Provides a wide range of firnctions. Includes Basic functions pIus logic and signed arithmetic operations, data handling, user I/O control and access to R1025-R8192 via Extended Table Moves. Expanded Functions Includes Advanced Functions plus expanded I/O and register addressing, floating point arithmetic operations, GENIUS I/O diagnostic functions, and additional communications control functions. Expanded II Functions Includes all Advanced Functions plus: Auxiliary I/O oven-ides, dynamic checksum of user logic for changes, active override detection, support of 64K Logic memory, faster solution of Relay Ladder Logic+ GFK-0145C Table 2. SYSTEM COMPATIBILITY Advanced Expanded Expanded II VERSION SYSTEM USE AlI CPU racks All CPU racks Requires: 1. IC6OOCB524K or later Arithmetic Control Module. 3. IC6OOLX---K or later Logic Memory Modules. 3. IC6OOCP630, CP62-, or CP61- CPU rack 4. Logicmaster 6 Release 4 or later. INSTALLATION The Logic control Module is installed in the CPU Rack, one slot to the right of the Arithmetic control Module. To ensure proper installation and removal of the Logic control Module, always use the insertion/ extraction tool packaged with the CPU. When replacing a defective module, the ribbon connector must be disconnected before removing the module. After inserting a replacement module, the ribbon connector must be reconnected. NOTE To prevent unpredictable operation by your Series Six or Series Six Plus CPU, power-down prior to removing or installing the Logic Control module and its ribbon connector. Dimensions: Circuit Board: Faceplate: Power Requirements: Storage Temperature: Operating Temperature: Humidity: Table 3. SPECIFICATIONS 8.15 x 11.0 x 1.20 (inches), 208 x 280 x 31 (mm) 12.46 x 1.175 (inches), 317 x 30 (mm) 5 V DC, .65A, 12 units of load (Supplied by CPU power supply). -20 to 70C (-4 to 158F) 0 to 60C (32 to 140F) 5% - 95% (non-condensing) 4 Logic Control Module GFK-0145C Table 4. ORDERING INFORMATION DESCRIPTION CATALOG NUMBER Advanced Logic Control Module Expanded Logic Control Module Expanded II Logic Control Module JC600CB502L or CB525 IC600CB512L or CB526 IC600CB515K CATALOG NUMBER REVISION SUFFIX The equipment listed above having the catalog numbers shown and the same equipment having a higher alpha suffix is designed for listing by UL for use as auxiliary control devices. The equipment is a direct replacement for equipment having the same catalog number but a lower alpha suffix. 0U This symbol on the nameplate means the product is listed by Underwriters Laboratories Inc. (UL Q Standard No. 508, Industrial Control Equipment, subsection Electronic Power Conversion Equipment.) For further information, contact your local GE Fanuc sales office. GE Fanuc Automation North America, Inc., Charlottesville, Virginia