The Reed Relay Output module can be utilized in either
an I/O Rack or a Model 60 CPU to provide a compact,
electrically-isolated, relay contact interface between user
power supplies and discrete loads. The Reed Relay Output
module features and benefits are summarized in Table I,
The module includes six, Form C, mercury-wetted
relays; each output circuit is separately fused and contains
an LED that indicates when the circuit coil is energized.
All six outputs are updated by the Series Six CPU during
an I/O scan.
The de-energized state of each relay is jumper-selectable
by the user; either normally-open (N.O.) or normallyclosed (N.C.) contacts can be selected on a circuitby-circuit basis.
The user also has the option to exclude the RC protection
circuit provided for each output; this jumper-selectable
option provides for low-level analog and instrumentation
Refer to Figure 1 (next page) for Reed Relay Output