GE Fanuc | Series Six | In Stock Ships Today GE Fanuc Series Six IC600

IC600YB924 Image


  • Availability: In Stock Ships Today!
  • Units in Stock: Immediate Availablity: 6 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE Fanuc
  • Description: 8 points 120Vdc Output Module
  • Weight: 3 lbs :: ≈ 2 kgs
  • Warranty: 2 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC600YB924 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

The 120 Vdc Output module can be installed in an I/O rack or in the I/O slots of a Model 60 CPU rack. Before the module is installed, the Dual-In-line-Package (DIP) switches on the rack backplane directly behind the card slot should be set. This setting will establish the desired correspondence between the outputs on this module and a group of eight consecutive output numbers in the program. To determine the proper switch settings, refer to the table in the Installation section of the Series Six Installation and Maintenance Manual, GEK-25361, The circuit board is designed to be installed and removed with the aid of an extraction/insertion tool. This tool should be used each time the board is removed or installed. Once the board is in place in the rack, the faceplate should be placed over it so that the connector at the lower part of the board mates with the faceplate connector. The faceplate should then be secured to the rack using the quarter-turn thumbscrews at the top and bottom of the faceplate.