GE Fanuc | Series Six | In Stock Ships Today GE Fanuc Series Six IC600

IC600YR511 Image


Same Day - Free Shipping

PDF Electric & Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with PDF Electric & Supply's 1-year warranty.

  • Manufacturer: GE Fanuc
  • Description: 19 inch I/O Rack Older Version
  • Weight: 3 lbs :: ≈ 2 kgs
  • Warranty: 2 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC600YR511 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

GER-83516D July, 1989 General Description The Series Six Input/Output (I/O) rack provides the regulated DC power, backplane and enclosure for the Series Six I/O modules; and is available in two versions: Standard and High-Capacity. The Standard I/O rack satisfies most applications of the Series Six Programmable Controller. The High Capacity I/O rack provides adequate current for applications utilizing I/O modules that demand collectively more than 6.1 amps. The I/O rack features and benefits are summarized in Table 1. Up to ten I/O modules can be installed in an I/O rack in addition to an I/O receiver module (Local I/O receiver or Remote I/O receiver). On the backplane adjacent to each of the ten I/O module card slots (inside the rack enclosure) are Dual-In-line-Package Standard & High-Capacity Rack Input/Output Rack (DIP) switches which allow the user to addresses for the corresponding I/O modules. set the The Standard I/O Rack provides +5 Vdc to its backplane and operates from 115 Vac or 230 Vac sources (at 47 to 63 Hz). The input voltage is jumper-selectable by the user. The High-Capacity I/O rack provides +5, +12, and -12 Vdc to its backplane. Input voltage is 95 to 260 Vac (no jumper selection required) at 47 to 63 Hz. The Standard I/O rack may be upgraded to a High-Capacity I/O rack by replacing the power supply with a High-Capacity power supply. A Light-Emitting Diode (LED) on the faceplate of the I/O rack power supply indicates that the DC power supplied by tie rack. is within tolerance. Refer to Table 4 for I/O Rack specifications. Table 1. Features and Benefits Features Benefits Available with Interchangeable Standard or High-Capacity Power Supply module: 115 Vac or 230 Vac Operation 47Hz to 63Hz Operation Can accommodate numerous types of 1/O modules. Compatible with all Series Six CPUs. Used in all I/O locations. Reduced spare-parts inventory cost. Equipped with dual-purpose mounting brackets. Removeable power supply module. Addressing switches on backplane. Can be rack-mounted or panel-mounted Reduced downtime and inventory cost. Easy installation of I/O modules, 2 Standard & High-Capacity Rack ..- .- GEK-835 16D Figure 1. User Items Ref. 81-PC-52 (Standard I/O Rack shown) 41 -Pin Backplane Connector Mates with the connector on a plug-in module. Power-Supply Front-Panel Terminal Block See the Installation section and Figure 4 of this Data Sheet. Logic-Power Switch Installation The following procedures summarize the proper installation of the I/O rack. Further details on each step can be found in the Series Six Installation & Maintenance Manual, GEK-25361. 1. The I/O rack can be rack-mounted or panel-mounted. The location and orientation of the mounting brackets depends on the mount. Refer to Figure 2. I WARNING Extreme care should be taken when making connections to the terminal block - - - 115 Vac or 230 Vac may be present. 4 . 5. 2. 3 . DIP Switches to Set I/O module address POWER Light On: The DC voltage output of the power supply is within tolerance. Off: DC voltage is out of tolerance. Refer to Figure 3. Connect a power cord capable of carrying the current drawn by the power supply to the terminal block on the front panel. The ground terminal on the terminal block must be connected to an adequate earth ground. Ensure that the input voltage jumper is positioned correctly and secured (Standard I/O rack only). After the connections have been made, mount the protective cover over the terminal block with the screws provided; make sure that the wires are routed through the opening in the cover. Install in the card slot at the extreme left in the rack an I/O Receiver module (or Remote I/O Receiver if this is the first rack in a Remote station). Standard & High-Capacity Rack 3 4. Any combination of Input, Output, I/O Transmitter and/or Remote I/O Driver modules can be installed in the other ten card slots in the rack, after the DIP switches (Figure 4) for each have been set to the appropriate address as indicated in Table 2. Note that an optional wiring trough is available to facilitate field-wiring to the various modules. NOTE If the POWER LED does not light at power-up, or intermittent errors occur in the course of operation, the current-rating of the I/O rack could be exceeded. Refer to Table 3, I/O Current Units to determine the total current requirements within a rack. Figure 3. I/O Rack Front-Panel Terminal Block Figure 4. Dip Switch Figure 2, Use of Mounting Brackets LINE 1 IL11 LINE 2 iL21 GROUND ia ,125 INPUT SELECTION JUMPER (STANDARD I! 0 RACK ONLY) ION) I AC INPUT LINE 95 TO 260 VAC 4 Standard & High-Capacity Rack GEK-83516D Table 2. Dip Switch Settings for I/O Point Selection for Eight-Circuit Modules I/O Point Dip Switch Position = Switch in OPEN Position (Depressed to the Left). Standard & High-Capacity Rack 5 GEK-835 16D Table 3. Summary of Units of Load for I/0 Modules Units of Load (1) Catalog Number IC600BF800 IC600BF80 1 IC600BF802 1C600BF804 IC600BF805 IC600BF806 IC600BF808 [C600BF810 IC600BF813 IC600BF814 IC600BF815 EC6OOBF816 IC600BF817 IC60OBF818 IC600BF819 IC600BF827 IC600BF830 IC600BF83 1 IC600BF84 1 IC600BF842 IC600BF843 IC600BF900 IC600BF901 IC600BF902 IC600BF903 IC600BF904 IC600BF905 IC600BF906 IC600BF907 IC600BF908 IC600BF909 IC600BF910 IC600BF912 IC600BF914 IC6OOBF915 IC6OOBF917 IC600BF921 IC600BF923 IC600BF924 IC600BF929 IC600BF930 IC600BF941 Module Description I/O Receiver Remote I/O Receiver 24 to 48 V dc Input 115 V ac/dc Input 230 V ac/dc Input 12 V ac/dc Input Interrupt Input 115 V ac/dc Isolated Input Type J Thermocouple Input Type K+ Thermocouple Input Type S Thermocouple Input Type T Thermocouple Input Type B Thermocouple Input Type E Thermocouple Input Type R Thermocouple Input High Speed Counter Advanced I/O Receiver High Density Input 0 to 10 V dc Analog Input 10 V dc Analog Input 4 to 20 mA Analog Input I/O Transmitter Remote I/O Driver 24 V dc Sink Output 48 V dc Sink Output 115 V ac Output 230 V ac Output 12 V dc Sink Output 12 V dc Source Output 24 V dc Source Output 48 V dc Source Output 115 V ac Isolated Output 230 V ac Isolated Output Reed relay output Axis Positioning Module, Type 1 Axis Positioning Module, Type 2 5 v TTL output 10 to 50 V dc Sink Output 120 V dc Output 10 to 50 V dc Source output 115 V ac Protected Output 0 to 10 V dc Analog Output +5 v +12 v -12 v 6 Standard & High-Capacity Rack GEK-835 16D Table 3. Summary of Units of Load for I/O Modules - Continued Catalog Number IC6OOBF942 IC6OOBF943 IC6OOBF944 IC6OOBF949 IC6OOBF946 IC6OOBF947 IC6OOBF948 IC6OOBF950 IC66OCBB900 IC66OCB902 i IC660CBB901 ~IC66OCB903 Module Description 10 V dc Analog Output 29 4 to 20 mA Analog Output 29 ASCII/BASIC Module (12K) 20 ASCII/BASIC Module (28K) 20 Loop Management Module 20 I/O Link Local 20 I/O CCM 20 I/O CCM4 2 0 Genius Bus Controller 20 Genius Bus Controller w/Diag. 20 Genius Bus Controller 20 Genius Bus Controll wo/Diag. 20 +5 v Units of Load (1) +12 v - 12 1 2 12 12 12 12 2222 1 -12 v (I) For +5 V dc, 1 unit of load equals 60 mA (300 mw of power). For +12 and -12 V dc, 1 unit of load equals 25 mA (300 mw of power). (2) +12 V and -12 V current is less than 1 unit of load if RS-232 mode is not used. Standard & High-Capacity Rack 7 GEK-83516D Table 4, Specifications - Dimensions: Rack-Mount: 19.0 x 14.0 x 10.3 (inches) 483 x 356 x 261 (mm) - Weight (Empty): - Power Supply Input @ 47Hz-63Hz: - Noise Immunity: - Power Supply Output: Panel-Mount: 20.0 x 14.0 x10.3 (inches) 508 x 356 x 261 (mm) 30 pounds (15Kg) High Capacity: 95 to 260 Vac, 250 VA (max.) Standard: 95-130 Vac 190-260 Vac 80 VA (maximum) Meets requirements of NEMA ICS 2-230 and ANSI C37,90A. High Capacity: +5 Vdc, 16.5 A max Total power +12 Vdc, 1.5 A max. -12 Vdc, 1.0 A max. 3 is limited to 90 watts. - Allowable Power Interruptions: - Module Capacity: - Operating Temperature: - Storage Temperature: - Humidity: Standard: +5 Vdc, 6.1 A max. 33 ms minimum at 115 Vac line. Ten Addressable card slots, plus one non-addressable slot for an I/O Receiver module. 0 -60 C (outside of the rack) - 2 0C - +8 0C 5%-95 % (non-condensing) 8 Standard & High-Capacity Rack GEK-83516D Table 5. Ordering Information | Standard I/O Rack High-Capacity I/O Rack I I IC600YR50 1B I IC6OOYR511A Catalog Number Revision Suffix The equipment listed above having the catalog numbers shown and the same equipment having a higher alpha suffix is designed for listing by UL for use as auxiliary control devices. The equipment is a direct replacement for equipment having the same catalog number but a lower alpha suffix. The UL symbol on the nameplate means the product is listed by Underwriters Laboratories Inc. (UL Standard No. 508, Industrial Control Equipment, subsection Electronic Power Conversion Equipment.) For further information, contact your local GE Fanuc sales office. GE Fanuc Automation North America, Inc., Charlottesville, Virginia

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180. We can help you with your Revision specific needs.

UPS Ground shipping is always FREE!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is in the original manufacturer’s packaging with all sub-assemblies and documentation. Comes with a PDF Electric & Supply 3-year warranty.

UPS Ground shipping is always FREE!

What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Electric & Supply packaging and includes a PDF Electric & Supply 3 Year Warranty.

UPS Ground shipping is always FREE!

What is Reconditioned?

Reconditioned products from PDF Electric & Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.

Our Reconditioned Products always come with a PDF Electric & Supply 2-Year Warranty.

UPS Ground shipping is always FREE!

Repair Service

3-5 Days for most repairs. 24 hour repair upon request at no extra charge. If part is unrepairable, we will exchange with a working unit or return unrepaired.